Auto Equipment and Supply Specialists

Rotary Products

 

    RotaryAUTOMOTIVE LIFTS


Rotary 2 Post Configurations


Model Number Capacity Product Specifics
SPO10 10,000 lbs. Symmetric Two-Post Lift
Conventional controlslocated on power unit
Two stage arms with three position flip-up adapters
SPOA10 10,000 lbs. Asymmetric Two-Post lift
Conventional controls located on power unit
Two stage arms with three position flip-up adapters
SPOA10-RA 10,000 lbs.
Conventional controls located on power unit
Includes rubber adapters
T hree stage arms with thread up adapters
SPO15 15,000 lbs. Symmetric Two-Post Lift
Conventional controls located on power unit
Aluminum stackable adapters
S15i 15,000 lbs. Symmetric two-post lift
inbayr controls and additional features
Aluminum stackable adapters
SPO18 18,000 lbs. Symmetric Two-Post Lift
Conventional controls located on power unit
Aluminum stackable adapters
S18i 18,000 lbs. Symmetric two-post lift
inbayr controls and additional features
Aluminum stackable adapters
SPO12-RA 12,000 lbs. Conventional controls located on power unit
Stackable adapters
Three stage arms with thread up adapters

Rotary SPOA10i
Rotary SPO12i
Rotary SPO15i
SMO14L
SPO12i
SPO15i

General Purpose 14K Lifts

SM / SMO Model Options


Ramp kits for drive-through operation.

7,000 lb. capacity rolling jacks are available to free wheels.

Optional accessories include work steps, rolling oil pans with splashguards, and more.

Available wheelbase ranges from to 158 - 307”. Available lifting capacities from 10,000 - 30,000 lbs.

Bolt on alignment kits can convert general service lifts into two or four-wheel alignment racks.

Optional 45° turning radius gauges make alignments and front end adjustments quick and easy.

Open or closed yoke models are available to improve access to vehicle undercarriage.

Adjustable latch bar ensures the runways are level when resting on the latch bar at any of the multiple locking positions.

Molded yoke cap covers that keep debris away from yoke sheaves.

Non-welded track to accommodate rolling jacks and drain pans.

Open front or open rear design for under vehicle access.

Dual function sentinel lock system features a patent pending slack cable guide arm that stays "on guard" to manage the lock latch. In a slack cable situation, the lock system kicks the lock into position. Fewer parts, less opportunity for service issues and more piece of mind.

Rotary four-post general service lifts can be equipped with bolt on alignment equipment. All Rotary alignment equipment is fully compatible with the new technology alignment systems on the market today.

Controls are mounted on the front column for technician convenience.

Rotary power unit located on the front column for more efficient performance.
Cylinder under runway eliminates any opportunity for vehicle door or mirror damage.

Portable work step is optional on SM and SMO series lifts.

Non Skid Surface allows sure grip of tires and a “sure foot” for technicians standing on the lift.

Protective strips on ramp ends eliminate floor gouging.

More Rise - A full 73 3/4” of rise, the highest in the industry.

Movable and replaceable rolling jack stops are made of “conveyor belt strength” rubber, giving the technician full flexibility to limit the travel of 1 or 2 jacks.

Cable inspection port allows a view of 100% length of the cable, an ANSI requirement.

Filter / lubricator / regulator for clean, lubricated air which will extend the life of your lift and air powered tools.

Automatic ramp chocks engage when the lift is raised. Clearance holes allow the ramp chocks to clear runway bolts with less noise on vehicle approach.

SM302


Four Post Alignment

AR / ARO Model Standard Features:
  • Four-Post alignment lifts feature the same great construction features of general service four-post lifts, plus:
  • Alignment lifts include two rolling jacks, recessed rear slip plates and stainless steel radius guages.
  • Perform four-wheel alignments on vehicles with wheelbases up to 212 1/2”
  • AR / ARO Model Optional Accessories
  • Ramp kits are available for drive-through operation.
  • Optional accessories include work steps, rolling oil pans with splashguards, and more.

Open or closed yoke models are available to improve access to vehicle undercarriage

Adjustable latch bar ensures the runways are level when resting on the latch bar at any of the multiple locking positions.

Molded yoke cap covers that keep debris away from yoke sheaves.

Non-welded track to accommodate rolling jacks and drain pans.

Open front or open rear design for under vehicle access.

Dual function sentinel lock system features a patent pending slack cable guide arm that stays “on guard” to manage the lock latch. In a slack cable situation, the lock system kicks the lock into position. Fewer parts, less opportunity for service issues and more piece of mind.

Rotary four-post alignment lifts are be equiped with recessed alignment equipment. All Rotary alignment equipment is fully compatible with the new technology alignment systems on the market today.

Controls are mounted on the front column for increased technician convenience.

Rotary power unit located on the front column for more efficient performance.

Cylinder under runway eliminates any opportunity for vehicle door or mirror damage.

Portable work step is optional on SM and SMO series lifts.

Non Skid Surface allows sure grip of tires and a “sure foot” for technicians standing on the lift.

Protective strips on ramp ends eliminate floor gouging.

More Rise - A full 73 3/4” of rise, the highest in the industry.

Movable and replaceable rolling jack stops are made of “conveyor belt strength” rubber, giving the technician full flexibility to limit the travel of 1 or 2 jacks.

Cable inspection port allows a view of 100% length of the cable, an ANSI requirement.

Filter / lubricator / regulator for clean, lubricated air which will extend the life of your lift and air powered tools.

Automatic ramp chocks engage when the lift is raised. Clearance holes allow the ramp chocks to clear runway bolts with less noise on vehicle approach.

Four Post Alignment
Four post alignment


Commercial Truck and Transit » Four-Post Lifts



  • Our four-post surface lifts accommodate a wide range of vehicles, with lift capacities up to 30,000 pounds.


  • SM300
    SM302


    Residential / Enthusiast 2 Post Lift

    There's a new revolution in lifts.

    Now you can have it all. Revolution four-post lifts are your storage solution and the ultimate tool for maintenance and repair. You can benefit from design and safety features demanded in the commercial service industry and enjoy the rugged yet functional and aesthetically pleasing characteristics that has made the Rotary Lift brand the recognized standard in auto lifts. Rotary lifts have a tradition of providing productivity and solutions to their customers, as well as meeting rigorous lift industry standards. Bring a Revolution four-post lift into your garage and be assured it was designed with your needs in mind. Get the value, reliability and important features unmatched by any other lift company. Revolution lifts by Rotary Lift.

    RFP7

    Revolution RTP9 9000lb 2 Post Lift

    Features:

    • 9,000 lbs. capacity lift for facilities with low ceilings
    • Dual hydraulic cylinders with chains
    • Carriage latch system engages every 3"
    • Secondary lock system includes a spring actuated slack chain locking device
    • Truck adapters included
    • ALI Certified


    Specifications:
    • Capacity 9,000 lbs.
    • Rise w/ Extensions 80-1/2"
    • Rise w/out Extensions 72"
    • Overall Height 111-1/4"
    • Overall Width 138-1/2"
    • Drive Through Clearance 97-1/4"
    • Width Inside Columns 111"
    • Arm Reach (Min/Max) 30" / 46-1/4"
    • Min. Adapter Height 3-1/2"
    • Driver-Over Height 1-1/2"
    • Voltage/Amps 208/230, 20 Amps
    • Motor 2 HP
    • Min. Ceiling Height 113" (9'-5")




    RTP10

    Revolution RTP10 10,000lb 2 Post Lift

    Features:

    • Overhead padded switch bar to avoid vehicle damage from being raised too high
    • 3-Stage front arm design enables you to position vehicle doors in front of or behind columns to avoid door damage
    • Top mounted pull design hydraulic cylinder. The piston rod is protected behind the carriage to prevent damage
    • Overhead cable equalization
    • Spring operated arm restraints, disengage at floor level
    • Single point lock release
    • Two full-stroke cylinders with overhead cable for equalization
    • Large rubber-padded swivel truck adapters with extra height extensions are standard.
    • ALI Certified


    Specifications:
    • Capacity 10,000 lbs.
    • Rise 77"
    • Overall Height 143-1/8"
    • Overall Width 131" (optional 137")
    • Drive Through Clearance 97" (optional 103")
    • Overhead Switch Height 136-1/4"
    • Front Arm Reach (Min/Max) 23" / 44-1/2"
    • Rear Arm Reach (Min/Max) 38-7/8" / 58"
    • Min. Adapter Height 3-5/8" / 10"
    • Width Inside Columns 109-3/4" (optional 115-3/4")
    • Voltage/Amps 208/230, 20 Amps
    • Motor / Phase 2 HP / 2 HP / 10*
    • Min. Ceiling Height 144"




    RTP12

    Revolution RTP12 12,000lb 2 Post Lift

    Features:

    • 12,000 lbs. capacity for raising most passenger cars, trucks and vans.
    • Hydraulic cylinders in each column, Full Stroke, Cylinder rod concealed inside carriage
    • Overhead cable equalization
    • Single Point lock release
    • Large rubber-padded swivel adapter with extra height extensions (4-1/2" and 8-1/2") are standard
    • Spring operated arm restraints, disengage at floor level
    • Padded overhead height limit switch bar
    • LI Certified

    Specifications:
    • Capacity 12,000 lbs.
    • Rise 82-1/2" with adapters
    • Adjustable Overall Height 165-1/4" / 177" (high setup)
    • Overall Width 150-3/8"
    • Drive Through Clearance 109-1/2"
    • Overhead Switch Height 159-3/8" low / 169-1/2" high
    • Front Arm Reach (Min/Max) 38-1/2" / 57-1/2"
    • Rear Arm Reach (Min/Max) 38-1/2" / 57-1/2"
    • Lifting Pad Height 6" / 10-1/2" w/short extension / 14-1/2" w/high extension
    • Width Inside Columns 123-1/4"
    • Voltage/Amps 208/230, 20 Amps
    • Motor 2 HP / 2 HP / 10* *optional 3-phase available
    • Speed of Rise 60 seconds




    Rotary Inground Lifts

    Rotary SL210i, Rotary SL212i
    Maximize Space and Productivity

    An open and aesthetically pleasing service area says “first class” to customers. A streamlined look instills confidence and can translate into higher customer satisfaction SmartLifts® have a smaller footprint than surface lifts; you can reduce your service facility square footage by 15%.

    No Environmental concerns - inground designs are environmentally friendly and fully contained in a polymer composite housing.

    Greater productivity - technicians prefer the SmartLift because they can work more efficiently under the vehicle and around the lift.

    Rotary Lift® introduced the SmartLift® in 1995 and has over 30,000 units in operation globally.

    Rotary provides free facility planning to boost your efficiency. No facility design is complete without it.

    SL210i Inground SL212i Inground



    New Rotary Lift YA12

    Rotary SL210i, Rotary SL212i

    Because your service operation needs speed, performance and reliability to increase productivity and add dollars to your bottom line. That’s “Y”.

    When it’s time for alignments, the Y-lift can handle them all - from tiny 71-1/2” wheelbases up to 158” giants. And, it’s compatible with all leading alignment instrumentation, including 3D and camera wheel alignment systems.

    When you add all of this to Rotary’s legendary factory support and industry leading field service network, “Y” would you want anything else?



    Parallelogram Lift

    Rotary's parallelogram lifts are already industry leaders.

    Standard features include patented heavy-duty mechanical locks made of T-1 steel, automatic wheel chocks, and a full-length safety strip, all designed with increased productivity and safety as the main focus. For even greater performance, Rotary offers a host of options, including built-in lights, rolling jacks and a variety of ramps.

    Parallegram 50K


    Pit Lift

    Rotary floor-running pit lifts provide extra flexibility. The rail-mounted lifts offer maximum freedom of movement inside the pit. Our free moving lifts are great for applications where there are several interconnected pits - usually connected by a tunnel. When not in use, these models can be moved out of the way into a storage area.

    Pit Run Lift
    Pit Lift


    Suspended Pit Lift

    Efficient: The standard needle roller bearings on the carriage rollers permit effortless sliding of the lift inside the pit.

    Ergonomic: The controls are mounted on the front of the lift to allow maximum freedom of movement in the pit.

    Productive: The hydro-pneumatic quick lift quickly moves the piston rod to the lifting point.

    Durable: Both the piston rod and the pump piston are hard-chrome plated, for protection against corrosion and wear.

    Productive: The hydro-pneumatic forced return lowers the piston quickly even when the lift is not loaded.

    Durable: The patented corrosion prevention system submerges the cylinder in oil every time the lift is lowered, protecting it against corrosion.

    Precise: The fine adjustment stroke allows more control when raising or lowering.


    Suspended Pit Lift
    Suspended Lift

    MCH418

    Suspended Lift

    The MACH 4 Mobile Column Hydraulic (MCH) lift consists of four or six columns with adjustable wheel forks for different wheel sizes, and is the faster and easier choice for your maintenance facility. Faster because the set-up time and lifting speed beats the competitor hands down! Easier because there are fewer cords to wind up and fewer steps required by the technician to put the lift in service.

    Standard Features

    • (4) mobile columns accomodating heavy duty trucks and light duty passenger vehicles
    • Automatic steering system
    • Battery operated (24V DC) with on-board charger
    • Easy to move adjustable forks
    • Retractable cord reels
    • 70" of rise
    • (4) 18,000 lbs. capacity columns (72,000 lbs. capacity total)


    Options
    • Extended fork kit
    • Light kit
    • Pendant control
    • Wheel engaging cross beam
    • Frame engaging cross beam
    • Jack stands



    MOD30

    Introducing Rotary Lift's New Shallow-design MOD30 Lift.

    Heavy Duty Inground lift designs have been around for more than 70 years. Today, concerns with our environment and the need for improved safety, functionality and customization are key components when investing in a new lift. Rotary Lift's new MOD30 lift has taken these requirements and developed the most sophisticated product ever developed for the lift industry.

    Mod 30 Inground


    TL07 Turf Lift

    Productivity Features:

    • The Patented “Double S” single piece construction column design provides a channel for the bearings to travel that maximizes the strength of the column and surface contact area of the bearing.
    • Slider block bearings of Tivar® 1000 polyethylene are self-lubricating and maintenance free.
    • Unlike most other lifts, Rotary® power units are designed and built by Rotary, for Rotary lifts. We don't use 3rd party power units which are for universal applications.
    • High-pressure cylinders in each column provide maximum lifting force and smooth operation.

    Benefits:

    • Highest rise available in the market with extended height models.
    • Can accommodate a 30” (762mm) wheelbase vehicle.
    • Lift capacity to handle the largest mowers- like the Jacobson HR-9016
    • Versatile small wheel attachment
    • Lift can accommodate both three and four-wheel turf equipment
    • Can also be used for golf cart maintenance
    • Unique design permits easy access to reels and hydraulic systems
    • Two cylinder design for greater dependability and smoother operation

    Optional:

    • Our TL07 can easily be converted to lift passenger cars and light trucks
    • N2206 - Arm kit for passenger cars and light trucks (7,000 lbs. / 3175kg capacity)
    • FA5911 - Air / electricity utility box with filter/ lubricator/ regulator

      TL07


    Rotary Low Rise Pad Lift

    The VLXS10 is your solution for quick service operation on today's passenger cars and trucks up to 10,000 lbs. Tire and brake work can now be performed on a wider variety of vehicles, thanks to the newly designed pads and adapters, wider drive-over capability and increased lifting capacity.

    The pad and adapter combinations allow lifting of uni-body and frame contact undercarriages - reaching recommended manufacturers pick-up points on most vehicles on the road today.

    Trucks and SUVs that require a wider drive-over capability will not be turned away. The VLXS10 has ramps and side drive-over areas to accommodate wider wheelbase vehicles.

    The 10,000 lbs. capacity offers the ability to lift the heavier vehicles being sold today. The VLXS10 is truly the heavyweight winner when comparing mid and low-rise lifts.

    • Drive-over ramps and side rails provide the width to support wider vehicles during approach.
    • Dual lifting cylinders provide the power required to lift a 10,000 lbs. vehicle.
    • Includes four heat-resistant non-slip pads, which provide a great contact surface for adapters or vehicle pick-up points.
    • VLXS series VersaLifts come standard with a three-position wheel-spotting dish for accurate spotting of vehicles.
    • 7,000 and 10,000 lbs. capacity models are available.

    VLXS10 Adapters

    The new three-position adapters have rubber contact pads on three sides increasing the positioning capabilities. The height added by these adapters excels the versatility of the lift. The adapters can be laid flat for 4 5/16” (110mm) additional height or on the side for 6 5/16" (160mm). Achieve maximum extension by laying the adapter on end and allowing an additional 8 9/16” (218mm) of height. The VLXS10 also comes with a set of four 1 1/2” rubber block adapters for low-profile vehicles.

    VLX510 Pad Lift Low Rise Lift


    VLXS7 Adapters

    The 7,000 lb. capacity low-rise lift comes standard with a set of rubber blocks for quick access to lower profile and uni-body frame vehicles. Blocks are 1 1/2” and 3” in height.